The specifications of the upcoming Nvidia RTX 3080 and 3090 graphics cards have been leaked and now we have images of the custom Zotac models. The new GeForce RTX 3090 Trinity HoLo is one of the unique cards that you can check out here. It has a new holographic design which is pretty unique and appealing in my opinion. You might think differently of course.
The RTX 3090 is not the only graphics card that is getting the holographic design. The RTX 3080 and 3070 are also going to get similar treatments. The following are the 8 first RTX 30 series cards that Zotac is going to release that we know of at the moment:
- GeForce RTX 3090 AMP Extreme
- GeForce RTX 3090 Trinity HoLo
- GeForce RTX 3090 Trinity
- GeForce RTX 3080 AMP Extreme
- GeForce RTX 3080 Trinity HoLo
- GeForce RTX 3080 Trinity
- GeForce RTX 3070 Twin Edge HoLo
- GeForce RTX 3070 Twin Edge
The ZOTAC GeForce RTX 3090 Trinity HoLo features a triple-fan cooler and a triple-slot design. So this is going to be a pretty beefy card.
While we cannot calculate the length of the card from the images, it is clear that this is going to be a pretty long one. It comes with an RGB shroud and a backplate that lights up as well.
The ZOTAC GeForce RTX 3090 Trinity HoLo comes with the new NVLink fingers and dual 8-pin power connectors. Which makes sense keeping in mind that the reference design model has a TGP of 350W.
There are versions of the RTX 3090 from ZOTAC that do not have the HoLo branding but they do not have the same design either.
The GeForce RTX 3070 Twin Edge HoLo has a similar design but only has two fans rather than 3. The new shrouds are going to be the major highlight and these cards are going to cost more than the entry-level ones with the regular designs.
NVIDIA will officially introduce GeForce RTX 30 series on September 1st, so we should learn more about these cards in a few days. The following are the specifications of the Nvidia 30 series graphics cards.
| RTX 3090 | RTX 3080 | RTX 3070 | |
| GPU | 7nm GA102-300 | 7nm GA102-200 | ?nn GA104-300 |
| Board | PG132 SKU 30 | PG132 SKU 10 | PG142 SKU 10 |
| CUDA Cores | 5248 | 4352 | TBC |
| Boost Clock | 1695 MHz | 1710 MHz | TBC |
| Memory | 24GB GDDR6X | 10GB GDDR6X | 8GB GDDR6 |
| Memory Clock | 19.5 Gbps | 19 Gbps | 16 Gbps |
| Memory Bus | 384-bit | 320-bit | 256-bit |
| Bandwidth | 936 GB/s | 760 GB/s | 512 GB/s |
| TGP | 350W | 320W | 220W |
This is all the information that we have for your right now. If you are interested in learning more then you can check out our RespawnFirst hardware hub.
Source: HD Tecnologia, @momomo_us, Informatica Cero