Author: Hasem

Categories
Call of Duty: Modern Warfare 2

Modern Warfare 2 Open Air Walkthrough

Call of Duty Modern Warfare 2 is a first-person shooting game with an excellent storyline and super tactful missions. Certain missions in Call of Duty Modern Warfare 2 can be quite difficult, such as the “Tradecraft” and “Open Air” missions. The “Open Air” mission in Call of Duty Modern Warfare 2, particularly, has given several players a hard time, especially on higher difficulties.

How To Complete “Open Air” Mission

Open Air is the 7th mission of Call of Duty Modern Warfare 2. You’re gonna have to scan the friendlies using thermal vision and spot the lazers given by the soldiers. When that has been executed, now is the time to find Hassan.

Find Hassan

You can find Hassan by using thermal vision. Look for any target with armed guards. When you find him, he’ll enter a car, and that car will be taken to the greenhouse. You won’t see what’s inside the greenhouse unless you turn off thermal vision. After looking into the greenhouse, you’ll be able to open fire, but you must only fire armed shoulders. Also, you’ll have to take note of the distance between the aircraft and the ground because there will be a delay between shooting the bullet and it hitting the ground. After you’ve successfully eliminated all the armed soldiers, the team on the ground will take care of the stable.

Clear The Green House

Once all the enemies have been eliminated, and the stable has been taken care of, you must search the greenhouse for Hassan. If he’s not there, that’s a sign for you to clear out the Green House, whichever way you prefer.

Clear the Compound

The only building left to destroy is the compound. First, shoot at the water container, so the enemies outside the compound are dealt with. After doing so, kill any remaining enemies attacking your team on the ground. After that’s done, switch LTM and break down the compound door. Take care of all the enemies outside until your team enters the building. When everyone has entered the building, eliminate the enemies leaving the compound. After all the enemies have been killed, your team will leave the building with the target, and the mission will be over.

We hope this guide has helped you complete the “Open Air” mission in Call Of Duty Modern Warfare 2, and after failed attempts, you can finally continue with the game’s storyline. If you need more assistance, here are some more Modern Warfare 2 guides for you:

Categories
Call of Duty: Modern Warfare 2

Modern Warfare 2 Borderline Mission Walkthrough

In this guide, we’ll be going over the Borderline Mission in Modern Warfare 2, discussing the tips you can keep in mind before getting into the thick of this mission. So, without any further ado, let’s get to it.

As the name suggests, this mission involves crossing the US/Mexico border. You’ll be engaging with many civilians that you’ll have to avoid hurting. Mainly, your focus will be a specific target that you’ll be looking to capture, Major Hassan Zyani. Leaving Price and Gaz behind, in this mission, you’ll have Colonel Alejandro and Rodolfo, under Laswell’s command, as your partners.

Borderline Walkthrough

Being dropped in the middle of a jungle, your first task would be to find Rodolfo and follow him through to the US/Mexico border wall. So, keep a steady pace and lock yourself with Rodolfo. As soon as you start to see the border wall, turn off your light and keep a steady stance, as you’ll be approaching enemy lines, so keeping a low profile should be your main focus in the meantime.

You’ll start to see a bunch of enemies ahead, who you’ll have to kill to get to the wall. Once you do so, climb the wall to get to the other side. There you’ll see a suburban site with houses everywhere. However, don’t get distracted and follow Alejandro quietly. After a while, you’ll be near a house fence. Here, you’ll need to wait for Alejandro to open the door. Once he does, you’ll be met with hostile civilians trying to provoke you, but keep calm and avoid conflict.

After a while, you’ll be near an Alleyway. Here, you’ll need to switch off your flashlight to avoid any kind of attention from the guys in the pick-up truck. Hide behind the van beside you, wait for the guys to appear from the second pick-up truck, and kill them as they do. After that, you’ll be headed into a house behind Alejandro, where you’ll need to exterminate any civilian with a gun posing a threat to your mission. Once through the house, you’ll be met with police.

Conceal your weapons and do as the police say, steadily moving towards them, but keep your guards up as the police car will blow up at any moment, revealing a surprise cartel wave coming towards you. Hide behind vans and exterminate the appearing cartel waves, but keep advancing towards the house. Once inside the house, clear the first and second floors crawling with cartel enemies. Once the enemy is clear, locate the second door to the left of the second floor, and enter it. This will move into a cut scene where Hassan and his men blow up the house, ending the mission.

Borderline, the fifth mission in COD MW II, brings a lot of action and stealth. The first part of the mission mainly depends on successful stealth, where you want to be as quiet as possible. Always follow Alejandro and keep moving forward to avoid being stuck in one place. Afterward, keep close to your partners and exterminate the enemy with full force when the mission goes haywire.

That’s all you need to know to complete this mission, but before you go, here are some more Modern Warfare 2 guides you may want to check out:

Categories
Tweaks and Fixes

How to Fix Minecraft Online/Multiplayer Connectivity Issue

Several players have encountered errors that occasionally prevent them from connecting to the online servers and, by extension, the multiplayer gameplay in Minecraft. Minecraft online connectivity/multiplayer error is reported on all consoles and PCs. Online server connectivity is a universal problem and is not unique to Minecraft. However, to understand why Minecraft multiplayer connectivity problem arose, we found several reasons and have compiled a bunch of fixes you can try.

Causes and Fixes For Online/Multiplayer Connectivity Issues in Minecraft

  • Poor Internet Connection
  • Interruption From Third Party Antivirus Software
  • DNS Server Errors
  • Issues With Microsoft Account Privacy Settings
  • Universal Minecraft Server Issue
  • Incompatible Minecraft Mods

To assist the players in combating the online/multiplayer connectivity hurdle in Minecraft, we created a list of solutions that have proven to have worked for many users worldwide and are effortless to follow through. Read ahead to find out what those fixes are, and follow each step diligently.

Fix #1: Fix Poor Internet Connection

You must first perform an internet connectivity check, as that’s one of the most common causes of Minecraft connectivity errors.

  • To find out whether the root cause of the online/multiplayer connectivity issue in Minecraft is a poor internet connection, head to online speed test websites that show the current status of your internet connection.
  • When that’s been established, in case of poor connection, connect your system to your router through an ethernet cable to get a better one.
  • Moreover, you can also take the load off your local internet by pausing and stopping any downloads or other processes that may be taking up the bandwidth.

Fix #2: Check Minecraft Server Status

As stated earlier, it is common that Minecraft’s online server is down and offline universally, which has nothing to do with issues on your end. Therefore, make sure you check out whether the online server you’re trying to connect to is online or offline in the first place.

  • For the most part, popular Minecraft servers such as Hypixel sometimes have internal issues that prevent all the players trying to connect to it from connecting successfully.
  • In such cases, all you can do is connect to another server or wait for this one to fix. If you’re connecting to a less popular or low players server, you can contact the server’s owner to relate your connectivity issue to them to see if they can make changes from their end.

Fix #3: Run Minecraft Without Mods

There are situations when the server you’re trying to connect to may be running on an unmodded version of Minecraft, creating an online/multiplayer connectivity issue. Therefore, inconsistencies between your mod and the server’s mod that Minecraft is running on may create huge problems. To join a server that is running on unmodded Minecraft:

  1. Head to Minecraft launcher.
  2. Click on the version selector.
  3. Click on the game version that’s states “Latest release.”
  4. Press Play.

Tip: Sometimes Minecraft issues are caused by hidden windows registry errors, updates, and driver problems. We recommend getting Restoro; it scans and fixes such issues much faster.

Get Restoro

Fix #4: Turn Off Antivirus Software

It’s a common occurrence that antivirus software on the system interferes with the connectivity/multiplayer playability of games like Minecraft. So, to rule out this factor, you’ll need to temporarily shut off your antivirus software to see if it’s causing issues with Minecraft.

  1. On the Windows taskbar search bar, type Windows Security.
  2. Open it.
  3. Click on Virus & Threat Protection option.
  4. Click on Open App.
  5. Your antivirus software will launch.
  6. Head into its settings and temporarily switch it off and then run your game and see if the problem persists.

We hope that one of the fixes did the trick for you, as it has for many, and you’re back on track with your game. Make sure you don’t miss any of the steps in the fixes detailed so that you may successfully solve the online/multiplayer connectivity issue on Minecraft. If you have any other known fixes for our readers, leave them in the comments below.

Categories
Tweaks and Fixes

How to Fix Greyed Out Windows Defender Problem

Windows users all around the globe are reporting a new error in Windows 10 or 11. After a pending update, the window defender component starts to grey out, making it impossible for users to access. There seems to be a handful of fixes in the wild that can possibly fix the problem.

What’s This Error

One of the first possibilities to consider for such a problem is the corruption of system files. SFC & DISM scans or Repair Install is the fixes in this case. Besides that, interference from a third-party software, such as antivirus or McAfee, can also cause these problems since they interact with the computer at a deeper level. Besides that, many reported missing security infrastructure from Windows installation as a core reason for Windows Defender issues.

So, with all that in mind, let’s not take a moment any further and head into the thick of the issue by applying different fixes to counter the error.

Fix #1: Clean Boot Your System

If Windows Defender is shutting down due to a 3rd party interference (an AntiVirus Suite), just clean boot your system.

This procedure will be the best line of action to counter the danger of you leaving your PC vulnerable to malware and viruses because it forces the system to run only the necessary services, leaving out every other 3rd party software from disturbing the system.

  • First of all, open the Run Program by pressing Win + R keys.
  • Type in ‘msconfig’ and hit Enter.
  • A window will appear.
  • Locate the Services Tab.
  • Check the Hide All Microsoft Services checkbox and click on Disable All.
  • After that, click on Apply.
  • Once you press OK, it will ask you to restart your PC. Don’t restart it yet.
  • Go back and launch the Run Program again.
  • Type in ‘msconfig’ and hit Enter.
  • Select Start Up, and open the Task Manager.
  • Disable all the High Impacts at the bottom of the window.

Once done, close all the tabs, restart your PC and see if the problem is resolved or not.

Fix #2: Run a Safety Scanner (Microsoft)

This issue can be fixed by simply downloading Microsoft Safety Scanner from its original website and having a run at it. It will usually take about 10 to 15 hours if you have an HDD. An SSD will result in faster completion.

Follow the steps below to run the Safety Scanner:

  • Download the Safety Scanner from their website according to the bit version of your system.
  • Launch the scanner and wait for the installation to complete, after which you’ll need to enable and confirm UAC.
  • This will allow changes to be made to your PC.
  • Click on the Full Computer Scan option and move to the next page by clicking Next.
  • After that, scanning would initiate. If any malware is detected, the software will remove it.

Once done, check your Windows Defender to confirm that the error no longer exists.

Fix #3: Update Windows

Another method of fixing the issue is by updating Windows and installing every pending update, which will keep the system up to date.

Follow the steps below to update your Windows:

  • Press the Win + R keys to launch the Run Program. Type in “ms-settings: windowsupdate” and hit Enter to launch the Windows Update settings.
  • A UAC permission window will appear. Select Yes to provide admin access.
  • Select Install Now to begin the installation.

After completion, restart your computer to see whether the issue is resolved or not.

Tip: If you’re having trouble with Windows updates, registry errors, drivers, and activation, we recommend using Restoro. This software will scan and fix your problem automatically, so you won’t have to keep guessing the source of the problem.

Get Restoro

Fix #4: Enabling the Windows Defender Forcefully

In the slight chance of no other fixes working out, try to enable the Windows Defender by force by using the Command Prompt in administrative mode.

  • Press the Win + R keys to launch the Run Program.Type in cmd, and press Ctrl+Shift+Enter to launch CMD with admin access.
  • Type the following command in the CMD Window:

REG DELETE “HKLM\SOFTWARE\Policies\MicrREG DELETE “HKLM\SOFTWARE\Policies\Microsoft\Windows Defender” /v DisableAntiSpyware

Once the process is complete, reboot your PC to see if the issue is resolved or not, and if it isn’t, then we’ve got a final trick up our sleeves.

Fix 5: Repair Install or Clean Install

If none of the other fixes worked for you, then you should definitely go for this one. The only reason for your greyed-out windows is corrupted system files. It may be that the files that are of the utmost importance to Windows Defender are damaged, and you need to completely remove and replace them. A Clean Install wipes out all your data, documents, photos, and personal files. So, make sure to create a backup before you perform this install. A Repair Install does not remove your personal data, but it takes longer to perform compared to a Clean Install. Make sure to perform an in-place repair install rather than the former.

With all that, we hope your Greyed Out Windows Defender problem is resolved. If one of the methods doesn’t work, you should feel free to apply all of them one by one by giving proper attention to every step. If you have some other fixes for our readers, leave them in the comments below.

Categories
Tweaks and Fixes

How to Fix Overwatch 2 BC-101 Error Code

Overwatch 2 is a team-based shooting game launched last month on consoles and PC, but the launch hasn’t been smooth. Several players complain about “BC-101 Error Code” error. This error is not as frightening as it sounds. It usually shows up whenever players are experiencing an internet connection timeout. This can be caused by several reasons, such as your firewall, unstable connection, or using Wireless LAN.

All Known Fixes for Overwatch 2 “BC-101 Error Code”

Overwatch 2 “BC-101 Error Code” is not a difficult error to tackle. Therefore, we have curated many fixes that will help you find a way around.

Fix#1: Use Task Manager

First, you can try solving Overwatch 2 “BC-101 Error Code” by utilizing the Task manager on your PC/laptop. To launch it, simply press Ctrl+Shift+Alt+Delete. It’ll typically show apps used in the background, such as chrome, youtube, etc. After opening Task manager, follow these steps:

  1. Head over to the CPU section.
  2. See how much of the CPU’s percentages any app uses.
  3. Select apps that are using 0 percent of the CPU.
  4. Press “End Task.”
  5. Refresh your computer and try to run the game again.

Fix#2: Change Date and Time

Changing the Date and time seems like a silly option, but don’t be fooled; the majority of the time, if your date and time are not setup correctly, it’ll not pick up any signals irrespective of the device, whether it’s a PC, Xbox, or a PlayStation. You can change it by following these steps:

  1. Head to the device you are using and locate the Date and Time settings.
  2. See if it’s synced with the official time of your area.
  3. If not, then sync it to the official date and time.
  4. You can do it both manually or have it done automatically through the internet

Tip: A lot of the time, such issues are caused by hidden technical errors in the registry, device driver updates, or something wrong with Windows itself. We recommend installing Restoro. This software will scan and fix your problem automatically, so you won’t have to keep guessing the source of the problem.

Get Restoro

Fix#3: Try Restarting The Internet Router

Restarting the internet has reportedly worked for some users.

  1. Head on over to the place you’ve kept your internet router.
  2. Unplug the Main wire that’s connected to the router.
  3. Keep it that way for a few minutes.
  4. Plug the wire back on and check to see if your game has started to work.

Fix#4: Unplugging and Replugging the Device

The process of unplugging and replugging the device is known as Power Cycling. Power Cycling is similar to restarting, but there are a few differences. You can try this out yourself by following these steps:

  1. Unplug the respective device you are using(PC, Xbox, or PS) from its main source.
  2. Keep it that way for five to six minutes.
  3. Plug the wire back into the main source and see if the issue has been solved.

Hopefully, one of these fixes did the trick for you, and you can now continue grinding in Overwatch 2. If none of these solutions have worked for you, we recommend going through the solutions again to see if you’ve missed any important details.

Categories
Call of Duty: Modern Warfare 2

Modern Warfare 2 Hardpoint Walkthrough

Call of Duty: Modern Warfare 2 is known for its stealthy and tactful missions. Among such missions is “Hardpoint,” which several players have trouble completing. In this walkthrough guide, you’ll be shown all the steps to easily finish the “Hardpoint” mission in Call of Duty: Modern Warfare 2.

Modern Warfare 2 Hardpoint Walkthrough

Hardpoint is the 8th mission in Call Of Duty Modern Warfare 2. In Hardpoint, your goal is to escort Hassan back to the base with as few mishaps as possible. To start off, you will have to scan the entire span of the area through the plane’s camera for any imposing threats. In the meantime, locate the gas station to the north and zoom in over to confirm the visual on your team. While you’re zooming in on people, keep an eye out for any Cartel members.

After that, move on to scan the Market. While you’re at it, take note of every building and its locations, as you’ll need that later when Graves gives you instructions about tasks in every building. Now, you’ll see that your team is moving forward. As soon as that happens, your team will be attacked by a car crashing into the truck. When that happens, you’ll be bombarded with enemies coming out of the buildings nearby, whom you must interact with to defend your team until the extraction team gets there.

As a tip for you, it will be in your best interest to target only the RPG enemies and those nearer to the team. Amidst all that, you’ll now be facing missiles being fired by the Cartel members toward your position. In that case, launch flares to deal with that. However, that’s not all. As soon as you’ve neutralized a missile, locate the person firing it and erase them quickly, so no more missiles are flying.

Now, all there’s left for you to do is to defend your team with all you got and, at the same time, clear away from the churches as there are civilians inside. Make sure you can maintain your defense until the extraction team arrives, and your team will be safe in the helicopter. And that will mark the end of the “Hardpoint” mission in Call of Duty: Modern Warfare 2.

The “Hardpoint” mission in Call of Duty Modern Warfare 2 is a difficult mission to carry out, especially when you must keep your defenses up, all the while waiting for the extraction team to arrive. However, following our detailed walkthrough, we hope you didn’t face much difficulty and are now on to your next mission in the game.

That’s everything you need to know on how to complete this mission. If you need more help, here are some more guides you may find helpful:

Categories
Tweaks and Fixes

How To Fix Epson Scanner Error E1460-B305 [SOLVED]

Epson, the most popular and biggest printer manufacturing company, provides customer satisfaction. Unfortunately, some issues and errors related to the Epson scanner were reported by Windows 10 and 11 users. This error says, ‘The scanner is in use or unavailable,’ titled, E1460-B305.

Why Is Error E1460-B305 Occurring

Antivirus applications on your system may stop the scanner from doing its job. If this is not the case, there might be a connection problem, and disabling any 3rd party interference might fix it.

System corruption can also cause this error, for which you can run an SFC scan to detect it. If your driver and system are incompatible, it may cause Error E1460-B305. Lastly, before setting up the scanner, check the main settings to ensure everything is in place.

Now that you know the relevant reasons for this error, the next step would be choosing the appropriate fix and implementing it.

Fix 1 – SFC Scan

Since there is a possibility that files may be corrupted in your system, conducting a system file checker (SFC) scan will be your best option. This will detect the corruption that might infect your system internally, fixing other error E1460-B305.

To implement this, first, type in ‘cmd’ in the taskbar and make sure to run it as administrator. Once you’re done with that, a command prompt window will open up, after which you can type in the ‘SFC /scannow’ and press enter. Once the scan completes, restart your PC to check if the scanner results in Error E1460-B305 again or not.

Fix 2 – Disable Antivirus

Antivirus on your PC may stop the scanner from entering your system’s security. Hence, disabling the Antivirus program will be your best option. As we know, Antivirus software varies from user to user, but the method to disable it does not. So, follow the steps below to fix this.

The most common way to disable the Antivirus program is via the taskbar. Select Disable and choose the ‘Until the computer is restarted’ option by right-clicking on the Antivirus program. However, we know that disabling Antivirus leaves your system vulnerable to attacks. Hence, using Windows Defender is your best option for now.

Fix 3 – Reconnect Scanner

As mentioned earlier, a connection problem with the Epson Scanner might cause error code E1460-B305. Hence, it is important to check that as well. As we know, printers come both in wireless and wired types. Just plug the cable out and reconnecting it can work out for wired scanners. While resetting Bluetooth can do the same for wireless ones.

Try out this fix a couple of times while restarting your scanner. If numerous attempts do you no good, switch to the next fix we’ve got for you.

Fix 4 – Run Scanner with Compatible Settings

Using the compatibility mode for running your scanner would also solve this error. Many users have reported this. Start by clicking on the scan icon. Then, head over to the context menu and select properties. After that, choose compatibility mode and mark the box for ‘Run the program in compatible mode. Once you’re done with that, press Apply and then press Ok.

Fix 5 – Repair/Reinstall Driver

The drivers for the Epson scanner might not be outdated, causing incompatibility issues and hence causing the error E1460-B305. Reinstalling or updating the scanner drivers will fix the error E1460-B305.

Driver Issue?

Tip: If you’re having driver issues, we recommend DriverFix to scan and update all your outdated drivers in just one click. DriverFix solves your issues faster; it is easy to use and lets you know whenever a driver update is available.

Downlaod DriverFix

That is all for our fixes for Error E1460-B305 while trying to use the Epson scanner. If you are facing errors and issues with other PC games or your PC, then also see our hub for commonly occurring PC errors and their fixes.

Categories
Tweaks and Fixes

How To Fix Wireless Headphones Bluetooth Connectivity Issue In Windows. [SOLVED]

Connecting or pairing wireless headphones in windows has always been a problem for most users. Recently, many people are reporting an issue that their windows operating system is unable to detect Bluetooth headphones. As easy to use, fixing the connectivity problem might be tricky.

First and foremost, the most probable reason for this error might be a support service issue. Either the Bluetooth service is disabled/unavailable, or not functioning properly. In addition to that, using Bluetooth headphones while using airplane mode would be a very silly decision. Either your system cannot detect the device, or it may find it hard to function with the system. The last reason which might cause this issue can be the improper functioning of the internal driver.

Fix 1: Restart Device And Repair Bluetooth

As mentioned above, your system may find it hard to connect with your Bluetooth device if its support service is not responding. To make it run or function properly, you might want to restart or repair the Bluetooth and try connecting other wireless devices you have on your system. Not only that, it can be a device problem if it is not functioning as it should. In addition to repairing, you might also want to look for devices paired to your Bluetooth other than your headphones, as your system can pair one device at a time.

Fix 2: Update Driver

There might be a slight chance that the Bluetooth driver you’re currently using may be corrupt or obsolete. Reinstalling it might do your work, as your driver connects your device to the system.

Driver Issues?

Tip: If you’re having driver issues, we recommend DriverFix to scan and update all your outdated drivers in just one click. DriverFix solves your issues faster; it is easy to use and lets you know whenever a driver update is available.

Download DriverFix

Fix 3 – Allow/Restart Bluetooth Support Service

This fix might make your Bluetooth headphone function just as desired. As mentioned earlier, enabling your Bluetooth support service will do the job. You can open the Run dialogue box by pressing the Windows+R button on your keyboard, where you can write services.msc and press enter. Locate the relevant support service option and choose properties from the context menu as you right-click it. After you’re done, just click on enter in the dialog. Then just set up Automatic for startup type.

Fix 4: Turn off Airplane Mode

If the airplane mode is active, no wireless device will function until you turn it off. This is essential because airplane mode is a security mode that blocks any third-party device from connecting with your phone, as it can cause trouble or safety issues sometimes. Turning off the airplane mode and reconnecting your Bluetooth headphones will fix the problem.

Conclusion

While wireless Bluetooth headphones may cause some issues initially, these headphones are very comfortable and greatly enhance the user experience. Keeping them working and functioning can be very easy. If you have more suggestions to help with this error, let us know in the comments below, or check out our PC Tweaks hub for more troubleshooting suggestions.

Categories
Tweaks and Fixes

How to Fix Docker Daemon Not Able to Connect at ‘unix:///var/run/docker.sock’

Although an excellent tool for application building and deployment, Docker can be a victim of errors like any other software. Recently, an error message “Cannot connect to the Docker Daemon at unix:///var/run/docker.sock” was reported by many users.

Although its roots can seem confusing to locate, the problem at its core is created by an overload of docker commands. However, there can be more than one reason for such an error. So, buckle up, read the reasons, and follow their appropriate solutions to get your docker app up and running in no time.

What’s Causing the Error

As mentioned earlier, the most probable reason for this error is when numerous commands are thrown at docker to perform, such as docker run, docker info, docker pull, stop, etc. However, this isn’t the only reason; it may be that Docker Daemon has stopped running at all, in which case you’d need to launch it with ‘systemctl’.

If not for the above reason, it could be that your Docker Application doesn’t shut down properly, which can cause problems when you try to run it the next time. Other than that, a lack of root privileges can also be a valid reason.

While these reasons may seem difficult to understand, they require only a few simple steps to eradicate. So, without fretting over this any further, see which fix from below solves the problem for you.

Fix #1: Launch Docker with Systemctl

As mentioned earlier, when docker stops running, a simple approach is to launch the service with systemctl. Usually, this happens when you’re trying to run docker for the first time after installation.

The systemctl command’s main purpose is to renew the SysV init system, managing the system services. So, this is the best option to use to fix this problem. However, if your system does not have systemctl, then follow the steps given below:

Launch the terminal and type in the following command: ‘sudo systemctl unmask docker’.
After the docker is unmasked, launch the docker daemon service via the following command: ‘systemctl start docker’.
This should start the service and solve the problem, but double-checking it doesn’t hurt. So, type the following command to see the docker status: ‘systemctl status docker’.

Fix #2: Clean and Restart Docker Service

As mentioned earlier, a failed service shutdown during some docker operation makes files become masked. This affects the docker daemon service connection.

First, open terminal and execute the following commands:

  • systemctl unmask docker.service
  • systemctl unmask docker.socket
  • systemctl start docker.service

After that, see if the problem is fixed. If not, then type in the following commands in the terminal to delete the Containerd directory:

  • sudo su
  • service docker stop
  • cd /var/run/docker/libcontainerd
  • rm -rf containerd/*
  • rm -f docker-containerd.pid
  • service docker start

Once the commands are executed, see if the docker daemon problem still persists. If it does, head over to the next fix we’ve got for you.

Fix 3: Launch Docker Service with SNAP (for SNAP installation)

If you installed the docker application via SNAP, and not through APT package manager, you need to follow the steps below to run the Docker service.

Launch the terminal.
Type in the following command and hit Enter: sudo systemctl unmask docker
After that, type in the following command to ensure your files aren’t masked: $ systemctl list-unit-files
Once that is done, try running the docker service via the following command: systemctl start docker
Then, to make sure the service is up and running, type in the following command and execute it as well: systemctl status docker
Conclusion

The error message “Cannot connect to Docker Daemon at unix:///var/run/docker.sock” may seem startling and difficult to handle initially, but the problem is quite simple. Hopefully, the fixes we’ve provided have worked out for you. If none of them are working out, you should reinstall the service from scratch and then try to apply the fixes above.

Protect Your Identity, Get NordVPN

Black Friday sale up to 68% off.

Get NordVPN

Categories
Tweaks and Fixes

How To Fix Screen Saver Settings Grayed Out On Windows 10 / 11

Several Windows 10 and 11 users report complaints of grayed-out screen-saver settings. After looking into the problem, there seems to be two possible root causes:

  • Local Group Policy has disabled the screen saver settings.
  • Your screen-saver settings have been hard-coded via Registry Editor.

Screen Saver Settings Grayed Out Fix

Fortunately, you don’t have to worry because we have created the exact two solutions so that you don’t have to see the grayed-out screen-saver settings on your Windows 10 and 11 anymore. If the first solution does not work, head on to the next, which might solve your problem.

Fix #1: Enable Screen Saver Through Group Policy Editor

For users whose system utilizes the gpedit.msc (group policy editor) or their local (or network) administrator utilizes it; this may lead to screen saver settings getting disabled by the policy. As of now, there are two policies that contribute to the issue, namely – “Enable Screen Saver” policy and “Force-specific screen saver” policy.

To fix this, you will need to use Group Policy Editor (gpedit.msc) to disable whatever policy is causing grayed-out screen saver settings. To do so, follow the steps described next:

  • Press Windows and R key simultaneously to open the Run dialog box.
  • In the text box type ‘gpedit.msc’.
  • Press Ctrl + Shift + Enter to launch the Local Group Policy Editor utility.
  • Click Yes to allow admin access.
  • In the opened window, use the side menu on the left to head to the following location: “User Configuration > Administrative Templates > Control Panel > Personalization”.
  • Double click on Enable (Enabled or Not Configured) Screen Saver.
  • Click on Apply to save changes.
  • Head back to the Personalization folder.
  • Click on Force a specific screen saver policy to Disabled (or Not Configured).
  • Click on Apply to save changes.
  • Restart your PC.

Fix #2: Enable Screen Saver Through Registry Editor (Windows 10 Only)

If the first solution didn’t, this one might work for you. In this fix, you’ll have to reconfigure your screen-saver settings via Registry Editor. The grayed-out screen saver settings may be happening due to the following registry values:

SCRNSAVE.EXE
ScreenSaverIsSecure
ScreenSaveTimeout

To verify whether any of the above registry values are hard coded inside “HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Control” location, follow the next steps:

  • Backup your registry data.
  • Press Windows and R key simultaneously to open the Run dialog box.
  • In the text box type ‘regedit’.
  • Press Ctrl + Shift + Enter to open.
  • Click Yes to allow admin access.
  • Inside the Registry Editor, head to the following location: “HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\Control”
  • Head to the right-hand side menu and see if any of the following keys are visible:
    • SCRNSAVE.EXE
    • ScreenSaverIsSecure
    • ScreenSaveTimeout
  • If you see any of them, right-click on them and press Delete.
  • Restart your PC.

Getting rid of the grayed-out screen-saver settings on Windows 10 and 11 may seem like a hefty task, but if you carefully follow through the detailed steps we have listed, you won’t have to deal with any difficulties. I hope this guide has helped you; you can now see the screen saver settings.

Having Trouble With Windows?

Tip: If you’re having trouble with Windows updates, registry errors, drivers, and activation, we recommend using Restoro. This software will scan and fix your problem automatically.

Get Restoro